ACCORDANCE OF THE QUALITY OF 250 GRAM IVORY CARTON PACKING BASED ON INDONESIAN NATIONAL STANDARD (SNI) DUPLEX CARTON

Authors

  • Lala Hucadinota Ainul Amri
  • Efnyta Muchtar
  • Inez Zahra Pradipta

DOI:

https://doi.org/10.46961/kreator.v3i2.295

Abstract

Ivory paperboard is a type of cardboard consisting of 2 or more layers and is commonly used for primary packaging. The formulation of the research problem is how the process of testing the properties of 250-gram ivory paperboard and the results of testing the properties of ivory paperboard based on the Indonesian National Standard (SNI) for duplex cardboard. The purpose of this study was to determine the quality of the physical properties, opacities, and chemical properties of 250-gram ivory paperboard and to determine the suitability of the paperboard that was tested with the Indonesian National Standard (SNI) for duplex cardboard. The research method used in this research is the quantitative method and testing method based on Indonesian National Standard (SNI) 0123: 2008 Duplex Carton. Based on test data obtained by ivory paperboard 250 grams, gramatur 247,573 gr / m2, mass density 766,479 kg / m3, pull resistance (picking) in good condition, oil penetration 7,852, water absorption 29.54 gr / m2, properties folds on MD (not broken), CD (broken), degree of whiteness (brightness) 82.52%, sheet composition on the top layer (chemical layer), the water content of 5.22%. So from the income, 250-gram ivory paperboard is in accordance with the Indonesian National Standard (SNI) 0123: 2008 Duplex cardboard.


Keywords— Ivory paperboard, Print quality properties, Indonesian National Standard 0123:2008 Duplex Carton.

Downloads

Published

2020-10-30

How to Cite

Amri, L. H. A., Muchtar, E., & Pradipta, I. Z. (2020). ACCORDANCE OF THE QUALITY OF 250 GRAM IVORY CARTON PACKING BASED ON INDONESIAN NATIONAL STANDARD (SNI) DUPLEX CARTON. Kreator, 7(2), 73–84. https://doi.org/10.46961/kreator.v3i2.295

Issue

Vol. 7 No. 2 (2020): Kreator

Section

Article

Citation Check

License

Authors who publish with Kreator agree to the following terms:

  1. For all articles published in the Kreator, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agree to the automatic transfer of non-exclusive publishing rights to the publisher.
  2. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).