IDENTIFICATION OF DEFECTS OF PET AND HDPE-BASED DRINKING WATER PACKAGING PRODUCTS
DOI:
https://doi.org/10.46961/jip.v8i1.57Keywords:
ProductDefect, Drinking Water Packaging, Plastic Packaging, PoliethileneTerepthalat, High Density PoliethileneAbstract
References
Hidayat, Dedi. 2020. Eksistensi Air Minum Dalam Kemasan di Ranah Digital, AQUA Pegang Kendali. Diakses tanggal 4 Juli 2020. https://infobrand.id/eksistensi-air-minum-dalam-kemasan-di-ranah-digital-aqua-pegang-kendali.phtml
Nurudin, Agus. 2018. Bottle Water In Indonesia. Diakses 4 Juli 2020 dari http://aspadin.com/uploads/1/0/2/3/102373556/bottled_water_in_indonesia_%E2%80%93_nielsen.pdf
Febryani, Y. (2016). Defect (Cacat) Pada Pre-Form PET Aqua 600 ml di PT Aqua Golden Mississippi. Jurusan Teknik Grafika Politeknik Negeri Media Kreatif, Jakarta.
Tasnim, R.S. 2017. Defect (Cacat) Pada Kemasan Botol PET Aqua 600 ml di PT Aqua Golden Mississippi Mekarsari. Jurusan Teknik Grafika Politeknik Negeri Media Kreatif, Jakarta
Lestari, U. 2019. Defect Pada Cap Kemasan Botol Aqua 600 ml Menggunakan Mesin Husky Cap. Jurusan Teknik Grafika Politeknik Negeri Media Kreatif, Jakarta
Rogers, Tony. 2015. Top-10 Injection Molding Defects And How To Fix Them. Diaksestanggal 5 juli 2020 dari https://www.creativemechanisms.com/blog/what-cause-injection-molding-defects-and-how-to-fix-them.
Bozzeli, John. 2013. Minimizing Black Specks. Diakses tanggal 5 Juli 2020. https://www.ptonline.com/articles/minimizing-black-specks
Cooley,Jeremy. 2017. 4 Causes of Black Specks in Your Injection Molded Parts. Diakses tanggal 5 Juli 2020 darihttps://blog.asaclean.com/4-cause-of-black-specks-in-injection-molding-0
Anonim. Injection Mould. Diakses tanggal 5 Juli 2020 dari http://www.mtn.com.tr/faydali/Injection_mould.pdf
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Ilmiah Publiprenuer and Politeknik Negeri Media Kreatif, Indonesia as the publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc. will be allowed only with written permission from the Jurnal Ilmiah Publiprenuer and Politeknik Negeri Media Kreatif, Indonesia.
Jurnal Ilmiah Publiprenuer and Politeknik Negeri Media Kreatif, Indonesia. The Editorial Team makes every effort to ensure that no wrong or misleading data, opinions, or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Jurnal Ilmiah Publiprenuer and Politeknik Negeri Media Kreatif are the sole and exclusive responsibility of their respective authors and advertisers.
Statement of Authenticity and Manuscript Copyright can be downloaded: here
After filling in the statement letter, please attach it as the supplementary file submission or send via e-mail: [email protected]