This is an outdated version published on 2025-09-22. Read the most recent version.

The EFFECTIVENESS OF PREVENTIVE MAINTENANCE PROGRAMME ON THE ACHIEVEMENT OF PRODUCTION RESULTS ON KOMORI LITHRONE G37 OFFSET MACHINE AT PT X

EFFECTIVENESS OF PREVENTIVE MAINTENANCE PROGRAMME ON THE ACHIEVEMENT OF PRODUCTION RESULTS ON KOMORI LITHRONE G37 OFFSET MACHINE AT PT X

Authors

  • Habibi Santoso Politeknik Negeri Media Kreatif, Indonesia
  • Destyadhi State Polytechnic of Creative Media Jl. Srengseng Sawah Raya No.17 Jagakarsa Jakarta, Indonesia, Indonesia

DOI:

https://doi.org/10.46961/kreator.v12i1.1627

Abstract

Obstacles to damage that occur to the machine, not only cause problems with the machine but also affect the achievement of production targets, such as what happened to the Komori Lithrone G37 offset machine which experienced problems in the production process of book A in the 6000 print process 9 times machine problems occurred, book B in the 4000 print process 10 times machine problems occurred. Obstacles that occur such as weak wind pressure, sensor constraints. Preventive maintenance optimisation is the solution. The research method carried out is observation and on the machine and analysis. The results of this study, after preventive maintenance the production results are better and register and no more print problems occur on the machine

Downloads

Published

2025-09-22

Versions

How to Cite

Santoso, H., & Destyadhi Tri Wibowo. (2025). The EFFECTIVENESS OF PREVENTIVE MAINTENANCE PROGRAMME ON THE ACHIEVEMENT OF PRODUCTION RESULTS ON KOMORI LITHRONE G37 OFFSET MACHINE AT PT X: EFFECTIVENESS OF PREVENTIVE MAINTENANCE PROGRAMME ON THE ACHIEVEMENT OF PRODUCTION RESULTS ON KOMORI LITHRONE G37 OFFSET MACHINE AT PT X. Kreator, 12(1), 17–25. https://doi.org/10.46961/kreator.v12i1.1627

Issue

Vol. 12 No. 1 (2025): Kreator

Section

Article

Citation Check

License

Copyright (c) 2025 Habibi Santoso, Destyadhi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with Kreator agree to the following terms:

  1. For all articles published in the Kreator, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agree to the automatic transfer of non-exclusive publishing rights to the publisher.
  2. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).