STUDY OF DEFECT ON 180 ML HDPE BOTTLES YOGURT PRODUCTS WITH SMC B11 EXTRUSION BLOW MACHINE AT PT X

Authors

  • Tommy Prasetya Kana
  • Handika Dany Rahmayanti
  • HM Didik

DOI:

https://doi.org/10.46961/kreator.v4i1.306

Abstract

The type of plastic packaging that is popular in the community is bottle packaging. The plastic material that is generally used to make plastic bottles is High Density Polyethylene (HDPE). The plastic bottle industry in Indonesia usually uses a blow molding process in its production process, where the blow molding process consists of injection blow molding, extrusion blow molding and stretch blow molding. The SMC B11 machine is one of the extrusion blow molding machines used to produce plastic bottle packaging. In producing workpieces, this machine still produces several products that are not in accordance with company standards, including in terms of production cycle times and product defects. Defects or defects that are often encountered include the appearance of spots, bent parison which causes the bottle to bend (the bottle body is thin one side) and blow pin which causes the thread to not fit.


Keywords— Bottle, Plastic, Defect, Extrussion Blow Molding

Downloads

Published

2021-07-31

How to Cite

Kana, T. P., Rahmayanti, H. D., & Didik, H. (2021). STUDY OF DEFECT ON 180 ML HDPE BOTTLES YOGURT PRODUCTS WITH SMC B11 EXTRUSION BLOW MACHINE AT PT X. Kreator, 8(1), 21–28. https://doi.org/10.46961/kreator.v4i1.306

Issue

Vol. 8 No. 1 (2021): Kreator

Section

Article

Citation Check

License

Authors who publish with Kreator agree to the following terms:

  1. For all articles published in the Kreator, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agree to the automatic transfer of non-exclusive publishing rights to the publisher.
  2. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).