ABLE TO PULL POLYLACTID ACID (PLA) MATERIAL ANET ET4 3D PRINTING MACHINE PRODUCT RESULTS
DOI:
https://doi.org/10.46961/kreator.v11i1.1222Keywords:
3D printing, Tensile test, PLA, FilamentAbstract
A 3D Printing machine is a machine that is capable of printing objects in 3 dimensions, made layer by layer by melting/melting a predetermined material. The material used to make specimens is Polylactic Acid (PLA) filament which has good strength and is easily decomposed in the environment. The resulting specimens were subjected to tensile tests with 3 different thickness variations, namely 2 mm, 3 mm and 4 mm. The results from the tensile test of the 2 mm thickness specimen had the greatest results of up to 43.29 MPa because the layers of the specimen were denser than the 3 mm and 4 mm specimens.
References
Alika, A. N., Viniani, P., & Hendrawan, A. (2023). Pengolahan Teknik 3d Printing Dengan Filamen Pla Sebagai Embellishment Pada Material Tekstil. 10(3), 4622.
American Society for Testing and Materials. (2016). ASTM D638-14, Standard practice for preparation of metallographic specimens. ASTM International, 82(C), 1–15. https://doi.org/10.1520/D0638-14.1
Ardiansyah, R., Sirwansyah Suzen, Z., & Erwansyah, E. (2021). Pengaruh Parameter Proses Terhadap Kekuatan Tarik Produk 3d Printing Menggunakan Filamen Polylactic Acid (PLA) Buatan R3d Maker. Jurnal Indonesia Sosial Teknologi, 2(12), 2153–2164. https://doi.org/10.36418/jist.v2i12.300
Dattatray Agashe, K., Sachdeva, A., & SachinShankarrao Chavan, P. (2020). 3D Printing And Advance Material Technology. International Journal of Grid and Distributed Computing, 13(2), 1899–1936.
Hadi Susilo, S., Setiawan, A., & Yudiyanto, E. (2023). Evaluasi Kekuatan Tarik Printer 3D dengan Variasi Suhu dan Ketebalan Layer pada Material PLA berdasarkan Standar ASTM D-638. Jurnal Energi Dan Teknologi Manufaktur, 6(01), 07–12. https://doi.org/10.33795/jetm.v6i01.3067
Kunarto, K., & Pratama, A. A. (2021). Analisa Temperatur Pada Heater Nozzle Dengan Variasi Nozzle Terhadap Hasil Produk Printer 3D Menggunakan Filament Pla. Jurnal Teknik Mesin. http://jurnal.ubl.ac.id/index.php/JTM/article/view/2339%0Ahttp://jurnal.ubl.ac.id/index.php/JTM/article/viewFile/2339/2171
Lubis, S., Djamil, S., & Yolanda, Y. (2016). Pengaruh Orientasi Objek Pada Proses 3D Printing Bahan Polymer Pla Dan Abs Terhadap Kekuatan Tarik Dan Ketelitian Dimensi Produk. Sinergi, 20(1), 27. https://doi.org/10.22441/sinergi.2016.1.005
Pranata, Y., Hasdiansah, & Arriyani, Y. F. (2022). Pengujian Kuat Tarik Produk Cetak 3D Printing Material ABS. Prosiding Seminar Nasional Inovasi Teknologi Terapan 2022, 2(January), 85–91.
Pratama, W. H., -, H., & -, H. (2021). Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Material Filamen PLA + Menggunakan Metode Taguchi. Sprocket Journal of Mechanical Engineering, 3(1), 39–45. https://doi.org/10.36655/sprocket.v3i1.568
Setyawan, B. A., & Ngadiyono, Y. (2022). Analisis Pengaruh Tingkat Kelembaban Filamen PLA Terhadap Nilai Kekuatan Mekanik Hasil Cetak 3D Printing. Jurnal Dinamika Vokasional Teknik Mesin, 7(1), 1–11. https://doi.org/10.21831/dinamika.v7i1.48259
Sujana, I. M. I. W., & Prasetyo, H. (2022). Analisa Hasil Cetak 3D Printer Dengan Teknik Layer By Layer. Jurnal Mekanik Terapan, 3(3), 93–98. https://doi.org/10.32722/jmt.v3i3.5174
Wicaksono, R. A., Kurniawan, E., Syafrianto, M. K., Suratman, R. F., & Sofyandi, M. R. (2021). Rancang Bangun dan Simulasi 3D Printer Model Cartesian Berbasis Fused Deposition Modelling. Jurnal Engine: Energi, Manufaktur, Dan Material, 5(2), 53. https://doi.org/10.30588/jeemm.v5i2.895
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Authors who publish with Kreator agree to the following terms:
- For all articles published in the Kreator, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agree to the automatic transfer of non-exclusive publishing rights to the publisher.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
